Press "Enter" to skip to content

7 day timer switch for lighting,touch panel switch supplier

admin 0

black sensitive light switch, 7 day timer switch for lighting,We offer Fast Delivery at the Lowest prices, shop safely with Australia’s leading online Electrical Wholesaler.,

To put in To install A Remote Control For A Hunter Fan

Wireless Gold 2 Gang 1 Way Wall Touch Activated Light Switch 86Based in Memphis, Tenn., Hunter Fans produces more than 300 fan models. In 1989, Hunter became the first manufacturer in the fan industry to sell wall-mounted and hand-held remote controls for its ceiling fans. Hunter fan remotes are specifically designed for Hunter ceiling fans and make operation of the ceiling fan more convenient.

Things You may Need
Phillips or flat-head screwdriver
Electrical tester
Orange wire connectors
Set the Hunter fan on high and turn on the lights to the ceiling fan.

Turn off the breaker that supplies power to the Hunter fan at the main breaker panel.
Test to verify that the facility has been disconnected. Remove the cover from the light switch that operates the fan. Use a two-pronged electrical tester and touch one probe to one of the black wires on the switch and touch the other probe to any metal on the electrical box or switch. Repeat this for the remaining black wire on the switch. If your power has been 7 day timer switch for lighting disconnected 7 day timer switch for lighting properly for tester won’t light up. Replace the switch cover.

Remove the canopy from the ceiling fan. The canopy covers the hanging bracket and attaches with two or more screws. Removing the canopy exposes the ceiling fan wiring.

Disconnect the Hunter ceiling fan wiring. Remove the wire connector that holds the 2 white wires together by twisting it counterclockwise. Remove the wire connector that connects the red and black wires from the Hunter fan to the black wire located in the electrical ceiling box.

Identify the Hunter ceiling fan remote wires. The Hunter remote receiver is rectangular in shape. Lay the receiver on its flat side and orient it with the wire antenna at the left and the five connection wires facing you. From left to right the wires are identified as follows; red to the sunshine kit, black to the fan motor, white to the fan neutral, white to the electrical box neutral and black to the electrical box black.

Install the Hunter fan remote. Twist an orange wire connector onto the red wire from the receiver and the red wire from the ceiling fan, connecting them together. Connect the black wire from the receiver to the black fan wire and the white wire from the receiver to the white fan wire, twisting orange wire connectors onto each set of wires. Connect the black wire from the electrical ceiling box to the remaining black wire on the receiver and the white wire from the electrical box to the remaining hot wire on the remote receiver using orange connectors.

Other People are Reading
How to put in an Emerson Ceiling Fan
How to use Hunter Ceiling Fan With a Remote Control

Push the wires and the remote receiver into the ceiling fan hanging bracket and reattach the canopy. Turn the breaker back on at the principle electrical panel to power the fan circuit.

Tips & Warnings
Always test to make sure the electricity is off to the realm that you’re working in to avoid electrical shock.
Related Searches
References
Funding Universe: Hunter Fan Company
Hunter Fan: Hunter Universal Fan & Light Remote Control
Ceiling Fans ‘N’ More: A couple of notes on ceiling fan wiring

Photo Credit Ceiling Fan image by Towards Ithaca from Fotolia.com
Promoted By Zergnet

7 day timer switch for lighting

Leave a Reply

Your email address will not be published. Required fields are marked *