Press "Enter" to skip to content

intermediate size switch,2 button led touch switch

admin 0

2 gang switch, intermediate size switch,1 Pcs Mini Touch Sensor Switch LED Strip Brightness Control DC 3-24V Capacitive,

Find out how to Wire A 3-Way Decora Rocker Switch

Decora is the lighting device brand line manufactured and distributed by Leviton Manufacturing. Differing from a standard toggle switch by the shape and style, the Decora switch is more modern and less obtrusive when installed in the wall. The three-way Decora rocker switch operates a light fixture from two different locations, providing you with a convenient way of turning on the lights. For a 3-way circuit to operate correctly, you must have two three-way switches installed on opposite ends of the circuit. The commonest approach to wire a three-way Decora rocker switch begins with the ability supply located inside the first switch box on the circuit.

Wireless Function Gold 1 Gang 1 Way Wall Touch Switch Floor LampsThings You’ll Need
Phillips or slotted screwdriver
Wire connectors
2 Three-way Decora rocker switches
2 Single gang rocker switch plate covers

Turn off the circuit breaker inside the main service panel that provides electricity to the three-way switch circuit.

Look inside the primary three-way switch box on the circuit and identify the two sets of cables. The first set of cables includes a black, white and bare copper wire. The second set of cables includes a black, white, red and bare copper wire.

Connect the white wire from the primary set of cables to the white wire from the second set of cables by twisting a wire connector onto both wires. Repeat the connection for the bare copper wire from the primary set of cables and the bare copper wire from the second set of cables. Push both sets to the back of the three-way switch box.

Wrap the black wire from the first set of cables around the common screw on the three-way Decora rocker switch. The screw will probably be labeled as “COM” on the back of the three-way switch.

Wrap the black wire from the second set of cables around the screw on the left side of the switch. Wrap the red wire from the second set of cables across the remaining screw on the right side of the three-way Decora rocker switch.

Attach the rocker switch to the three-way switch box at the highest and the bottom of the switch and cover with a single gang rocker switch plate cover.

Look inside the second three-way switch box and identify the wires inside. This cable set features a black, red, bare copper and white wire wrapped in black electrical tape.

Other People are Reading
How to install a Leviton Three-Way Light Switch intermediate size switch
How to install a Light Fixture With Three Wires

Wrap the black wire around the common screw on the three-way switch. Wrap the red wire across the screw located on the left side of the switch then tighten both screws on the Decora rocker switch to carry these wires in place.

Wrap the white wire wrapped in black electrical tape around the remaining screw on the right side of the three-way switch. Wrap the bare copper ground wire around the green screw. Attach this three-way switch to the second three-way switch box at the top and the bottom of the switch and canopy with a single gang rocker switch plate.

Activate the circuit breaker inside the main service panel that provides electricity to the three-way switch circuit.

Tips 4 Way Switch Wiring Diagram
“Wiring 1-2-3”; Steve Cory; 2005

intermediate size switch

Leave a Reply

Your email address will not be published. Required fields are marked *