Press "Enter" to skip to content

momentary push button switch uk,light switch hot to the touch

admin 0

wall light touch switch, momentary push button switch uk,Feather Touch Switch, Wholesale Various High Quality Feather Touch Switch,

To fix To fix A PSP WLAN Switch

Wireless White 2 Gang 1 Way Light Switch Touch ScreenThe WLAN switch on the original Sony PlayStation Portable turns the console’s wireless networking capabilities on and off. Unfortunately, the switch sometimes becomes loose or “sticky” and stops working correctly. Troubleshoot the malfunctioning switch to get your PSP online again quickly.

Promoted by Things You will Need
Small Phillips-head screwdriver
Tweezers
Loose Switch
Remove any UMD game disks or memory sticks from the PSP.

Remove the battery from its casing, and unscrew the four screws within the battery compartment.
Unscrew the remaining screws — two on the back and one on the underside edge — while holding the PSP’s faceplate in place. Pull the faceplate off gently, and set it aside.

Jiggle the WLAN switch until its lower section — the part usually covered by the faceplate — slides back into place. You might want to use tweezers if the switch does not slide back with gentle pressure.

Unscrew the small screw holding the LCD plate down if the WLAN switch still doesn’t slide in. You’ll have the ability to access the whole housing for the WLAN switch with the LCD plate removed. Do not touch the screen, however, because smudges are difficult to remove.

Replace all the screws, and test your PSP’s wireless connection with the WLAN switch within the On position.

Broken Switch
Buy a brand momentary push button switch uk new WLAN switch if the unique is broken beyond repair. Find new WLAN switches online from replacement part sites.

Other Individuals are Reading
How to repair a PSP Power Switch
How to repair the PSP Internal Error 80410A0b

Remove any UMD game disks or memory sticks from the PSP. Then remove the battery from its casing, and unscrew the four screws.

Unscrew the remaining screws holding the PSP’s faceplate in place, after which pull the faceplate off gently, and set it aside.

Unscrew the small screw holding the LCD plate down.
Pull the WLAN switch connector up gently from its connection to the motherboard. Set the brand new WLAN switch connector onto the motherboard; it should click in with little or no pressure. Re-attach the LCD plate and the faceplate, and test the new switch.

Tips & Warnings
Do not lose any screws — they’re very small and hard to replace.
Opening your PSP will violate the warranty. If your PSP is multiple year old, this is not going to be a problem because the warranty may have already expired. But if you’d like to keep up your warranty for further repairs, you have to send your PSP to Sony for repairs rather than fixing the WLAN switch yourself.
Related Searches
References
YouTube: Fix the PSP Wi-Fi Switch
Promoted By Zergnet

momentary push button switch uk

Leave a Reply

Your email address will not be published. Required fields are marked *