Press "Enter" to skip to content

zweibruder remote switch,1 way Wall Touch Switch

admin 0

touch light switch australia, zweibruder remote switch,Largest electronic, electrical and industrial products catalogue and data library online in Asia.,

Wireless Dimmer Switch To Simplify Home Lighting Control

Wireless 3 gang 1 way Wall Touch SwitchNowadays, smart home is becoming an increasing number of popular, and we enjoy much convenience that it brings to us. Smart lighting is a very important aspect of smart home, and wireless dimmer switch is one in all smart lighting controllers that simplify the control.

Generally the wireless dimmer switch is designed based on RF control technology, and the entire system consists of zweibruder remote switch a remote and a receiver. The remote is designed with press buttons that perform different functions, as an example switching and brightness adjustment. It sends out radio frequency which varies depending on different countries’ and areas’ requirements, 434MHz or 868MHz are the commonest ones, but 2.4GHz may additionally exist in the market. Accordingly, the receiver will receive the RF signal and convert it to and output PWM signal to manage the connected LED lights. It’s wireless between the remote and the receiver.

Wireless dimmer switch is quite convenient and simple to use with a control distance up to 20 meters between the remote and receiver. You may control flexibly. The RF signal is stable with high anti-interference if the frequency is 434MHz or 868MHz. If the frequency is 2.4GHz, it may be interfered by another signals with the same frequency. Then how to decide on the correct wireless dimmer system

Firstly now we have to figure out the kind of lamp we use. AC or DC, constant voltage or constant current if DC For example, whether it is AC LED lamp, a receiver with AC input and output is required. If it is DC zweibruder remote switch with constant voltage input, reminiscent of DC LED strip lights, you will have to decide on a corresponding receiver and an extra power supply for the receiver. So does the DC one with constant current input.

Secondly, once the controller is chosen correctly, we now have to decide on a signal sender, for instance RF remote, the sender should have the function of switching and dimming. The RF remotes are available in various types including traditional wall switch, rotary knob and the emerging remote key control and full touch control. You possibly can choose in keeping with your preference.

Once all done and the wiring is ready, you should use the wireless dimmer switch to control your private home lighting. Pairing is required before operation, however it is sort of easy with a learning key on the receiver.

The wireless dimmer switch is powered by removable built-in lithium battery and consumes little or no power, generally the battery can last for years, you do not need to replace it frequently. Since it’s wireless, it’s portable without restriction, you possibly can control lighting of almost all areas of you house synchronously or separately with one remote in any areas since one remote can control multiple receivers. You too can put it into a set bracket on the wall. The switching and dimming are easy by buttons, which offer smooth and gradual brightness adjustment to guard human eyes. Your preferred brightness might be stored and memorized and the sunshine will restore to the saved brightness when power on again.

zweibruder remote switch

Leave a Reply

Your email address will not be published. Required fields are marked *